New! DuraShield Standard Motorcycle Cover

DuraShield Covers has a new motorcycle cover available. The Standard Motorcycle Cover is similar to our Lined Motorcycle Cover but without a cotton lining for a lower price. The Standard bike cover is lightweight for travel and folds up into a tight package for storage.

The DuraShield Standard Motorcycle Cover is versatile for indoor and outdoor use. The 300 denier poly fabric is waterproof, dustproof, and UV resistant. The lower portion of the cover is constructed with heat-resistant material that will not melt on hot pipes. No need to wait for your bike to cool down before installing the motorcycle cover!

A premium “Vent X” venting system allows condensation to evaporate without damaging your engine, pipes, or chrome, while effectively blocking rain and snow from seeping through the cover.

Grommets and tie downs are included for keeping the motorcycle cover secured in windy conditions. You can also thread a cable lock through the grommets to secure the cover and act as a theft deterrent for your bike.

A matching storage bag comes with the motorcycle cover at no extra cost. Use this handy storage bag to store your cover when not in use. This cover is available in X-large, large, and medium sizes. Free shipping on all orders to the continental United States!

The motorcycle cover should be tight enough to prevent excessive wind flapping.

In windy conditions, your motorcycle cover should be tied down tightly to prevent flapping in the wind. Excessive wind flapping can shred and destroy the cover and even damage the finish on your bike. Whenever possible, park your motorcycle in a sheltered area that provides at least some protection from the wind.

Fabric and Fit

The more snugly your motorcycle cover fits your bike, the less the cover will flap in the wind. Extra fabric can snap violently in strong winds. If the wind is strong enough, you’ll want to use more tie downs to secure the cover tightly to your motorcycle.

A heavier weight fabric performs better in windy conditions than a lightweight motorcycle cover. Air vents also help to prevent excessive lofting by allowing airflow underneath the cover.

Towing

Wind turbulence during towing is another problem. Make sure the motorcycle cover you use for travel is approved for towing. The cover must be snug and securely attached to the motorcycle. DuraShield motorcycle covers are not approved for towing on an open trailer. The wind flapping could easily rip apart the cover or damage your bike’s finish.

Classic Accessories Motorcycle Cover

Need a cover for your motorcycle, scooter, or trike? Classic Accessories motorcycle covers are now available from DuraShield! Don’t let garage debris or outdoor exposure get the best of your bike. Shield it from the elements with a Classic Accessories motorcycle cover.

Lined Motorcycle Cover

For outdoor storage, the Classic Accessories Lined Motorcycle Cover provides all the protection you need, with an interior heat shield, non-scratch windshield liner, and air vents. All-weather, UV resistant ProtekX™ Plus fabric protects against sun, rain, dirt, pollutants, and other elements. A matching stuff sack and two tie-down cords are included.

Travel Motorcycle Cover

For protection on the road, take cover with Classic Accessories Travel Motorcycle Cover. This lightweight outdoor cover protects against weather, dirt, and pollutants. Ultra-soft material in the upper panel protects against scratches, and a heat-resistant lower panel protects the cover from contact with hot pipes. An integrated stuff stack and two elastic tie-down hooks are included.

Motorcycle Dust Cover

For indoor protection, baby your bike with the Classic Accessories Motorcycle Dust Cover. This scratch-proof storage cover keeps your motorcycle dust-free while stored indoors. The PolyPro™ breathable fabric allows moisture to escape without damaging your bike, and an elasticized bottom hem and tie-down cords keep your cover secure. A matching stuff sack and two elastic tie-down cords are included.

Trike Cover

Need a cover for your trike? Get rugged, all weather protection indoors and outdoors with a Classic Accessories Trike Cover. This heavy-duty cover provides all-season protection against sun, rain, dirt, and pollutants with ProtekX™ Plus fabric. A soft windshield liner protects against scratches, and a metallic heat shield panel prevents the cover from melting on hot exhaust pipes. Dual vents allow for breathability and moisture control. A matching stuff sack and two hooked elastic tie-downs are included with this trike cover.

A motorcycle dust cover keeps dirt and dust off your bike.

One of the questions we hear motorcycle riders ask is, “Why do I need a motorcycle cover if my bike is stored in the garage?”

If you keep your motorcycle outside, the reasons for a cover are more obvious: protection from rain, dew, dirt, dust, and other elements. But if your motorcycle is pampered enough to earn a spot in the garage or even in the house, you might think you can get by without a cover. But a motorcycle cover still serves an important purpose, even if you store your bike indoors.

Dust and Dirt Protection

After washing and waxing your bike, you’ll want to keep it clean with a motorcycle cover. Dust and dirt can build up on your bike if you don’t protect it. When the garage door opens and closes, it stirs up dust that will settle on your bike, so it’s especially important to keep your motorcycle covered in the garage. During winter storage, a motorcycle cover will keep your bike clean and ready to ride when spring comes again.

Moisture Protection and Humidity

The more humid the environment where you live is, the more breathable your motorcycle cover needs to be. The higher the humidity, the more moisture that builds up underneath the motorcycle cover. With a breathable indoor motorcycle cover (such as 100% cotton), the moisture can escape easily without causing rust or other damage. The cotton cover keeps dirt and dust off your bike but allows condensation to evaporate easily.

"The cotton lining is top notch and the size (large) is perfect for my '09 sport bike." - Sharon W.

Travel Motorcycle Cover

“Fabulous, we bought 2 for a Harley Softail and Kawasaki Vulcan with windshields. They fit perfect. As for being weatherproof, not an issue—we only wanted them to keep the dust off while stored in the garage. Elastic bottom fits tight, and it will completely cover the front wheel, saddlebags and rear tire.”
- Philip G.

Lined Motorcycle Cover

“This motorcycle cover is exactly as described, and I found it to be of very good quality. The cotton lining is top notch and the size (large) is perfect for my ’09 sport bike.”
- Sharon W.

“Purchased this cover for my ’03 Dyna Lowrider and fits perfectly. Has held up well (better than past products I’ve owned) in the blazing Arizona sun.”
- “ElixirMixer”

“Very nice…the other one I have is just as good; the big difference is the soft cotton liner…I put [the other one on] a large windshield and was worried that taking it off and on would eventually scratch it. With this one I have no worries…but I’m still careful. THANKS…if you’re looking, go with this one.”
- Phil S.

“Read other reviews on this cover and finally decided to purchase it. Received item very quick! 3 days is very good for free shipping to Hawaii. When opening box, cover came with several bungee cords and a carrying bag. Cover fit perfectly over my 87 Honda Magna and just snug enough. Haven’t used it in the rain, but for a basic motorcycle cover it is a good buy. The cover also has a soft cotton lining on the upper area of cover and a couple of vents at the rear.”
- Shelakio

“Great cover!! My husband loves it. Great purchase—thank you!!”
- Marnie K.

EZ Pack Motorcycle Cover

“My man loves it. He says it’s pretty easy to put on and off. Yes, it was a good buy. Thank you so much.”
- Allyson Rascon

For indoor storage in high humidity areas, a cotton motorcycle dust cover offers maximum breathability.

One of the best ways to protect your motorcycle from humidity in the garage is to use a breathable motorcycle cover. Mold and mildew thrive in moist, humid conditions, and when humidity gets trapped under your motorcycle cover, it creates prime conditions for the growth of mold and mildew.

To prevent this, you need a cover with a good ventilation system that allows condensation to evaporate before it causes damage to your bike or cover.

Motorcycle covers vary in their level of breathability. The most breathable covers are cotton dust covers, which are designed for indoor storage only. Lightweight covers are not as breathable as cotton, but they provide protection from rain and moisture. Full storage covers that are waterproof must include a ventilation system in order to allow the cover to breathe.

The cover should be long enough to reach at least halfway down the wheels, but there should be a few inches, but there should be a few inches of space between the bottom of the cover and the ground. The extra space makes the cover more breathable.

After you wash your bike or ride in the rain, make sure the bike dries completely before installing the cover. For extra protection in areas with high humidity, you may want to consider using a desiccant to absorb moisture under the cover. If you store your cover in a humid garage, we recommend a cotton dust cover for maximum breathability.

What Type of Motorcycle Cover Do I Need?

A travel motorcycle cover packs down into a size that is slightly larger than your hand.

For Travel:
A travel motorcycle cover is light enough to pack into a small bundle that takes up minimal space in your storage bags, yet it still provides full protection from rain and UV rays. It also makes your bike less conspicuous for thieves. Thread a lock through the grommets on the cover for even more peace of mind.

For Indoor/Outdoor Storage:
A fully lined motorcycle storage cover is thicker than a travel cover and provides more protection. The cover is lined with 100% cotton for a baby-soft interior that cradles your motorcycle’s paint and finish. It also comes with a heat-resistant lower panel that allows you to install the cover even before the bike cools down. Hot pipes and engine parts will not melt the cover material.

Because of the thickness of the lined storage cover, it packs down into a larger size than the travel cover, but if you have enough room in your saddlebags, the cover could be used on the road as well.

For Indoor Storage:
A motorcycle dust cover is the way to go when you only need to use the cover for indoor storage. This 100% cotton cover is completely breathable to protect your bike from moisture caused by humidity in the air. It keeps dust, dirt, and grime off your bike, keeping it in prime condition.

What Size Motorcycle Cover Do I Need?

If the cover doesn’t fit right, it won’t provide the level of protection that your bike needs. A motorcycle cover sizing guide will help you find the right size cover for your bike. It’s also a good idea to measure the length of your bike to make sure the cover will be long enough to fit.

If you have questions about what size motorcycle cover to get—including questions about whether the cover will fit over saddlebags, fairings, backrests, and any aftermarket accessories or modifications you’ve made—don’t hesitate to contact customer service. One call could save you a lot of hassle in the long run.

Lined Motorcycle Cover

Gift Ideas for Motorcyclists:

• Lined Motorcycle Storage Cover

The Cadillac of covers with heat shields on the lower panel, scratch-resistant cotton lining, and “Vent X” venting system

• Travel Motorcycle Cover

For road trips and covering the bike while it’s parked at work

• Motorcycle Dust Cover

For motorcyclists who need indoor protection against dust and dirt

Gift Ideas for ATV Riders:

Trailerable ATV Cover

• Trailerable ATV Cover

Protection for the rider who transports his ATV to the trail head

• Storage ATV Cover

Available in camouflage for hunters

• ATV Winch Cover

Protect the winch, not just the ATV

Gift Ideas for Snowmobilers:

• Trailerable Snowmobile Cover

Reliable protection for snowmobile riders on the go

Trailerable Boat Cover

Gift Ideas for Boat Owners and Fishermen:

• Fish/Ski Boat Cover

Trailerable cover protection for V-hull runabouts, fish/ski, and inboard/outboard boats

• Fishing Boat Cover

Trailerable cover protection for 14′ to 16′ fishing boats

• Pontoon Cover

Trailerable cover protection for pontoons 17′ to 28′ long

• Outboard Boat Motor Cover

Protect your investment from weather damage with a 2-25 HP outboard motor cover

• Jet Ski Cover

For PWC / jet ski cover protection from the sun, wind, and rain

This motorcycle cover includes heat shields for protection from hot pipes.

Installing a motorcycle cover is simple, but there are a few things you need to be aware of, such as snag points, hot pipes, and proper fit. The following instructions will help you learn the proper way to install a motorcycle cover.

1. Read all instructions included with the cover before installation.
a
2. If your motorcycle cover includes a heat resistant lower panel, you can install the cover immediately after riding. However, waiting just 5 or 10 minutes can greatly increase the life of the cover.
   a

   If the motorcycle cover does not include heat shields, wait until the pipes have a chance to cool down before installing the cover. The cover can melt on the hot pipes if installed too soon after riding.

a
3. Locate the front tag of the cover, indicating the portion of the cover that goes over the front of your motorcycle.
a
4. Drape the front of the cover over the front of the motorcycle.
a
5. Pull the cover down over the windshield and handlebars, taking care not to let the material catch on sharp points. Mirrors, muffler ends, shifters, brakes, foot pegs, and antennas are potential snag points that can accelerate the wear on your cover or even puncture it. Avoid these snag points as you install and remove the cover.
a
6. Tuck the front of the motorcycle cover down over the front wheel. The cover should reach past the centerline of the wheel.
a
7. Drape the back of the cover over the seat and rear of the motorcycle. Avoid snag points as you pull the cover down over the sides and rear of the motorcycle. The cover should be long enough to reach past the centerline of the rear wheel, and the elastic hem should fit snugly around the bottom of the motorcycle.

If your motorcycle cover includes grommets, you can use a bike lock to secure the cover underneath the motorcycle. The grommets also allow you to tie down the cover in case of windy conditions.

"Great quality, perfect fit, soft interior lining."
- Jenn

The lined storage motorcycle cover from DuraShield is weatherproof, scratch-resistant, and thickly lined. It’s also a favorite among our customers. See what they have to say about this cover:

“I have burned through 4 other covers in barely two years. This one is the one. Great quality, perfect fit, soft interior lining. It hasn’t been through a winter yet, but the quality is so superior to the other covers I’ve tried, I’m sure it will stand up just fine.”
- Jenn (CA)

“The cover arrived earlier than I thought. The item fit my 150cc Vespa very well and I believe it was a worthwhile purchase. I have not tested the cover’s high temperature tolerance, as I have only used the cover when my scooter was cool.”
- Amanda P.

“The cover was a much higher quality than I expected. Very happy with the product.”
- Anthony M.

“Great Cover for a Great Price! HD Ultra Classic, Electra Glide Classic, and Heritage Softail Classic. The motorcycle cover fits great for all three bikes.”
- Joy M.