Replace your ATV cover if the fabric becomes torn or worn through.

An ATV cover keeps your quad clean and dry during storage and trailering. For the best protection, your cover should be free of debris and snow buildup.

Washing Your ATV Cover

The easiest way to clean an ATV cover is to wash it while it’s on your ATV. Use a soft brush to remove debris and hose the cover down with a low-pressure garden hose. Do not throw your ATV cover in the washing machine, and avoid the use of harsh chemicals. Your ATV cover is designed with special coatings that can be compromised by harsh soaps, chemicals, or bleach.

Storing Your ATV Cover

Make sure your ATV cover is clean and completely dry before storage. A wet, dirty ATV cover encourages the growth of mold and mildew. Store the cover in a dry storage area, preferably in a temperature-controlled climate.

Replacing Your ATV Cover

For the best protection, your ATV cover should be free of rips and tears. If the fabric wears through or you get a hole in the cover, it’s time to replace it or take it to an upholstery shop for professional repair.

An ATV cover should include a venting system.

Need a cover for your ATV or UTV? Here are some tips on choosing the right quad cover for outdoor storage, trailering, and indoor storage.

Fabric

The thickness of an ATV cover is measured by the denier of the fabric. The higher the number, the thicker the fabric is. For example, a 300 denier ATV cover is denser and will last longer than a 200 denier cover. Heavier fabric costs more but will hold up better when exposed to harsh weather conditions and trailering.

Breathability

Since an ATV cover that repels water can also trap moisture underneath the cover, it’s important to buy a cover with a venting system. Vent flaps not only allow condensation to evaporate but they reduce wind lofting, which can damage the cover. The vents should be designed to allow moisture to escape without letting rain get inside the cover.

Trailerable Covers

If you plan to use the ATV cover when transporting your quad on an open trailer or truck bed, make sure you get a trailerable ATV cover. The fabric should be thick enough to withstand trailering, and there should be plenty of tie downs to secure the cover to the ATV.

Storage Covers

If you only need the cover for storage, consider how much your ATV will be exposed to the weather. If you store the ATV outside in harsh weather, look for a heavy duty cover with plenty of tie downs. If you store the ATV inside a shed or garage, a lighter cover will work to keep out dust and dirt.

"Has held up for me so far in Wyoming winds up to 90 miles an hour." - Andrew

Looking for the best cover for your ATV? Check out these reviews for DuraShield customers for ATV covers and UTV covers.

ATV Cover (Trailerable)

“This is a durable 300 poly tarp has held up for me so far in Wyoming winds up to 90 miles an hour. As long as it is strapped around your ATV, there won’t be a chance of you waking up in the morning with a naked ATV.”
- Andrew A.

ATV Cover (Universal Gray)

“Very reasonably priced and covers my ATV perfectly. It’s made it through one winter with lots of snow and has held up great.”
- J. Watson

ATV Cover (Camo)

“Great product for the price! I was very pleased with the quality and the fact that it covered my entire Yamaha Kodiak 4 x 4 including the tires with a mounted equipment and gun rack. The free shipping arrived ahead of schedule. Thank you.”
- Andrew C.

“Delivered on time and was as described. Held up in a storm that occurred the day after I put it on. I’m happy with it.”
- R. Adams

UTV Cover

“Good Cover and good quality material. Not much more could be said – fits my Rhino just fine.”
- James R. Bender

Check the ATV cover dimensions to see if it will fit your bike.

Before making your ATV cover purchase, make sure you find the right size cover for your ATV!

1. Measure the length, width, and height of your ATV. Do not measure up and over the handlebars, windshield, or other parts. Measure in a straight line.

Take into account any add-ons or accessories that stick out from your ATV that you want underneath the cover. Some accessories may need to be removed before the cover will fit. Most ATV covers are sized to fit ATVs with racks and winches, but they may not work with windshields, snorkels, and other add-ons.

2. Check the cover dimensions for the cover that is recommended for your ATV. The dimensions of your ATV should fit within the dimensions of the cover.

Most powersports cover stores provide a sizing chart or product description that lists the ATV make and model along with the size cover recommended for your particular ATV. Use the manufacturer’s recommendation to find the right cover for your bike. Then measure your ATV to make sure the cover will fit before making your purchase. If you have questions about which size ATV cover you need, contact the store’s customer service department with your concerns.

A trailerable ATV cover can be used for both storage and transport.

Do You Plan to Use Your ATV Cover for Storage and Trailering?

First, decide whether you want to use the ATV cover for storage only or for storage and transport. A trailerable ATV cover can be used for both storing your quad and for hauling it on an open bed trailer. A trailerable cover is thicker, more durable, fits snugly, and includes tie down straps to secure the cover to the ATV. A storage cover that is not approved for trailering should only be used for storage.

Will the ATV Cover Be Used for Outdoor Storage?

An outdoor storage cover for your ATV will be exposed to harsh elements, including rain, snow, UV rays, and strong winds. The harsher the weather is, the more durable your ATV cover will need to be. Thick, heavy duty ATV covers with water-resistant or waterproof coatings and UV protection will last longer in harsh environments.

Is There a Venting System?

No matter whether you use your ATV cover for indoor or outdoor storage, a venting system is crucial. It allows condensation and moisture to evaporate from underneath the cover. Without a venting system, this condensation will be trapped next to your ATV and can cause moisture damage. A proper ventilating system prevents moisture damage by giving any moisture that forms underneath the cover a chance to escape.

What Size ATV Cover Do You Need?

Find the right size cover for your ATV. The cover description should list dimensions and/or a list of ATV makes and models. Even if you see your model listed, be sure to measure your ATV—including any accessories and modifications that affect the stock dimensions—in order to make sure the cover will fit. It can save you the hassle of returning the cover for a different size.

Trailerable ATV cover

What size ATV cover do I need?

Check the sizing chart for the cover you want to see if it will fit your ATV make and model. Then measure the length of your ATV from front to rear to make sure the cover will be long enough for your bike.

Is my ATV cover waterproof?

ATV covers provide different levels of water resistance. DuraShield ATV covers are designed to repel water and keep your bike dry, although in a heavy downpour, some moisture may get through.

Also, keep in mind that condensation will form on any covered vehicle because it creates a thermal barrier. The cover material must be breathable in order to allow this condensation to evaporate. If condensation is allowed to build up underneath the cover, it can cause moisture damage.

How can I keep mold and mildew from forming on my cover?

Breathability is important for preventing mold and mildew growth. Keeping the cover free of dirt and debris will also help prevent mold and mildew from growing on the cover. DuraShield ATV covers are protected with a Water-Tec coating that resists mold and mildew.

How do I install my ATV cover?

Find the tag sewn into the hem of the cover that indicates “FRONT.” Drape the front of the cover over the front of the ATV, carefully pulling it over any snag points. Work your way to the rear of the ATV cover, pulling the cover down the sides and over the rear bumper. Pull the elastic hem down snugly over the wheels.

If your cover is trailerable, secure the cover using the tie down straps provided.

How do you wash an ATV cover?

The easiest way to wash an ATV cover is to spray it down with a garden hose. Use a sponge to wipe away dirt and grime. For tougher stains, use mild soap. Do not use detergent or other harsh chemicals to clean the cover. Drape the cover over the ATV or a clothesline to dry.

Can I use my ATV cover for trailering?

If you want to cover your ATV while transporting it on an open trailer, the ATV cover must be approved for trailering use. Trailerable ATV covers are designed to be able to withstand harsh wind speeds and exposure to the elements. They also come with secure tie downs that keep the cover from flapping violently in the wind.

Lined Motorcycle Cover

Gift Ideas for Motorcyclists:

• Lined Motorcycle Storage Cover

The Cadillac of covers with heat shields on the lower panel, scratch-resistant cotton lining, and “Vent X” venting system

• Travel Motorcycle Cover

For road trips and covering the bike while it’s parked at work

• Motorcycle Dust Cover

For motorcyclists who need indoor protection against dust and dirt

Gift Ideas for ATV Riders:

Trailerable ATV Cover

• Trailerable ATV Cover

Protection for the rider who transports his ATV to the trail head

• Storage ATV Cover

Available in camouflage for hunters

• ATV Winch Cover

Protect the winch, not just the ATV

Gift Ideas for Snowmobilers:

• Trailerable Snowmobile Cover

Reliable protection for snowmobile riders on the go

Trailerable Boat Cover

Gift Ideas for Boat Owners and Fishermen:

• Fish/Ski Boat Cover

Trailerable cover protection for V-hull runabouts, fish/ski, and inboard/outboard boats

• Fishing Boat Cover

Trailerable cover protection for 14′ to 16′ fishing boats

• Pontoon Cover

Trailerable cover protection for pontoons 17′ to 28′ long

• Outboard Boat Motor Cover

Protect your investment from weather damage with a 2-25 HP outboard motor cover

• Jet Ski Cover

For PWC / jet ski cover protection from the sun, wind, and rain

Below is a comparison chart of the trailerable and storage ATV covers available at DuraShieldCovers.com.

Specifications	DuraShield Covers	DuraShield Covers	DOWCO
Model	Trailerable ATV Cover	Universal ATV Cover	Guardian ATV Cover
Water Repellent?	Yes, Water-Tec Coating	Yes, Water-Tec Coating	Yes
Mildew Resistant?	Yes	Yes	Yes
Material	300 Denier Poly	200 Denier Poly	100% Nylon
Seams	Double-Stitched	Double-Stitched	Double-Stitched
Tie Down Straps	3 Click-fit Straps	None	None
Hem	Elastic	Elastic	Elastic
Gas Tank Access?	Yes	No	No
Storage Bag?	Yes	Yes	Yes
Trailerable?	Yes	No	No
Colors	Black	Camouflage, Gray	Black
Sizes	L (up to 75″ long) XL (up to 85″ long)	L (up to 84″ long) XL (up to 89″ long)	XL (up to 81″ long) XXL (up to 94″ long)
Warranty	5 Year Limited	5 Year Limited	2 Year Limited

DuraShield ATV Storage Cover

Installation

1. Remove the cover from the storage bag and unfold the cover.
2. Find the label sewn into the hem of the cover that indicates “FRONT.” Drape the front of the cover over the front of the ATV, carefully pulling it over the handlebars, mirrors, racks, and other front components. The cover is designed to reach over most front and rear rack combinations.
3. Continue installing the cover as you work your way towards the rear of the ATV. Be careful not to snag the cover on the rear rack, foot pegs, muffler ends, and other sharp points.
4. Pull the elastic hem down tightly around the wheels. It should reach down far enough to cover most of the wheels.

Cleaning

With very little maintenance, your ATV cover should last for years of use. To make sure your cover lasts as long as possible, you should clean it regularly. Brush away dirt and grime with a soft terry cloth. Then wash the cover with warm water and a sponge. Do not use harsh detergents to clean the cover, as this may damage the protective coatings. Use mild soap and water to clean stains that will not wash away with water alone. Allow the cover to air dry thoroughly before folding it for storage.

Dowco Guardian ATV Cover

Dowco’s Guardian® ATV covers are available in XL and XXL with a universal fit for even the largest ATVs. These ATV covers protect your bike from rain and snow, UV rays, tree sap, bird droppings, and other harmful effects.

The 100% nylon cover includes a venting system to inhibit condensation buildup and moisture damage. The seams are double-stitched for extra strength and long life, and the hem is elastic for a snug fit on any bike.

Using an ATV cover reduces the risk of theft and vandalism. Dowco covers even include an internal pocket for concealing a cover alarm (not included).

A two-year limited warranty guards against the risk of defects in materials or workmanship.

For more information, visit our product pages:

• Dowco ATV Cover XL
• Dowco ATV Cover XXL