DuraShield ATV Storage Cover
Protecting your ATV with a storage cover is a small step, but it goes a long way in protecting your ATV from rain, snow, dirt, dust, and sun damage. Follow these instructions to properly install your
ATV cover from DuraShield or other manufacturers. These instructions also apply to most
UTV covers.
a
Installation
- Remove the cover from the storage bag and unfold the cover.
- Find the label sewn into the hem of the cover that indicates “FRONT.” Drape the front of the cover over the front of the ATV, carefully pulling it over the handlebars, mirrors, racks, and other front components. The cover is designed to reach over most front and rear rack combinations.
- Continue installing the cover as you work your way towards the rear of the ATV. Be careful not to snag the cover on the rear rack, foot pegs, muffler ends, and other sharp points.
- Pull the elastic hem down tightly around the wheels. It should reach down far enough to cover most of the wheels.
Cleaning
With very little maintenance, your ATV cover should last for years of use. To make sure your cover lasts as long as possible, you should clean it regularly. Brush away dirt and grime with a soft terry cloth. Then wash the cover with warm water and a sponge. Do not use harsh detergents to clean the cover, as this may damage the protective coatings. Use mild soap and water to clean stains that will not wash away with water alone. Allow the cover to air dry thoroughly before folding it for storage.
Boat Cover Support Pole
Keep water from pooling on your boat cover with the new
Adjustable Boat Cover Support Pole from DuraShield. Standing water on your boat or pontoon cover can allow moisture to seep through the cover. The extra weight on top of the cover can also stretch out the material and mess up the snug fit of the cover. With the use of one or more support poles, you can prevent water pockets and provide support in the right places to make the water run off the cover instead of puddling.
a
The DuraShield boat cover support is constructed of 1″ aluminum tubing that is lightweight and corrosion resistant. The support pole includes anti-slip rubber ends to keep it in place and a thumb set adjustment knob. The telescoping pole adjusts from 36 to 64 inches and can be used to support any area of the cover. Depending on the size of your boat or pontoon, you may need to use more than one support pole.
Features:
- 1″ Aluminum Tube
- Resists Corrosion
- Telescope Adjustment
- 36″ to 64″ Height Adjustment
- 1 per package
Now available for only $15.99 with FREE shipping. For more information, visit our product page.
Trailerable Boat Cover Installation Diagram
Whether you’re trailering your boat or storing it for the off-season, a
trailerable boat cover can provide the protection and shelter that your boat needs. Rain, snow, and UV rays can damage your boat if left unprotected. Leaves, dirt, and debris can leave it dirty and wet. With a boat cover, all these factors are eliminated, and your boat is ready for use whenever you are.
a
See the installation steps below to secure your cover for trailering or storage. These instructions are designed specifically for DuraShield boat covers; however, they may also apply to covers from other manufacturers.
To Install Your Boat Cover:
- Cover any sharp points or edges on the boat (such as the corners of the windshield) with a cloth or sponge to avoid rips or tears when the cover is strapped tightly across the boat.
a
- Find the label with arrows, sewn into the hem of the cover, that indicates “Front.” Drape the front of the cover over the bow. Then roll the cover back over the boat and pull down the sides. The elastic hem or shock cord will help secure it in place.
a
Boat Cover Strap System
- Use tie down straps to secure the cover to the boat. Each tie down system works differently. The following instructions apply specifically to the DuraShield Boat Cover tie down system. Connect four straps (A) to the four lower buckles (C) on one side of the cover and run the straps underneath the trailer beams to the other side of the boat. Connect the other end of the straps into the lower buckles (C) on the other side of the cover.
a
- Connect four straps (B) to the four upper buckles (D) on one side of the cover and run the straps over the top of the cover through the loops. Connect these straps to the upper buckles (D) on the other side of the cover.
a
- After connecting all of the straps, cinch the straps down tight for a secure fit.
Boat Trailering Tips
Be sure to use, tighten, and secure all straps and hooks when transporting your boat on a trailer or open vehicle. Failure to do this may cause the cover to blow off and cause injury to others. It may also result in damage to the cover.
After driving a short distance, stop and check to make sure the boat and cover are secure. Tighten the straps as needed. Continue to check the boat and cover at all rest stops along the way. We recommend the use of additional tie downs for high speed travel.
Dust covers for motorcycles provide indoor protection.
When it comes to choosing a motorcycle cover, there are several things to consider before deciding which type of cover you need. Are you planning to store your motorcycle indoors or outdoors? Will it be exposed to the elements or sheltered in a carport or garage? Do you plan to carry the cover on your bike to use on the road? Do you want the ability to secure the cover with a lock?
a
Indoor or Outdoor Storage
For indoor storage, a motorcycle dust cover is all you need. This light cotton material is breathable for protection in moist or humid conditions, and the soft material won’t scratch your bike. Use a dust cover when weather protection is not a factor.
For outdoor storage, you need protection from the weather with a lined motorcycle storage cover. The thick, water-resistant material is tough enough to hold up under regular exposure to rain, snow, UV rays, and other outdoor stresses. The more exposure your bike will have to the elements, the more protection you need from your cover. Make sure the cover includes a venting system to prevent moisture damage.
Travel Covers
If you plan to take your cover with you on the road, you’ll want to look for a travel motorcycle cover. These covers are lightweight and compact for easy on-board storage without filling up your saddlebags. Made of a thinner material than outdoor storage covers, they provide water-resistant protection for use on road trips or just around town.
Motorycle Cover Locks
You can reduce the chances of your cover or bike being stolen by locking the cover to your bike with a cable lock. Some motorcycle covers include reinforced grommets at the hem that allow you to slip a lock under the bike. A motorcycle cover lock also secures your cover in strong winds.
Did you see our first email newsletter? In an effort to serve our customers better, DuraShield Covers is now sending out monthly email newsletters, featuring a tip of the month, storage and trailering advice, and the latest DuraShield news.
Why sign up for the DuraShield newsletter?
- Stay up to date with the latest product reviews, industry information, and how-to’s
- Get free storage and trailering tips
- Be the first to find out about new products and special offers
Get on the subscriber list by visiting our homepage and entering your email in the newsletter box in the righthand sidebar, as shown below:
a
Boat Cover Reviews (V-Hull, Runabouts, Fish/Ski, Inboard/Outboard)
Trailerable Fish/Ski Boat Cover
“Great
boat cover. I own a 22′ Tige wakeboard boat with a tower, but did not want to pay 600.00 to 1000.00 for a custom cover. So I bought this cover (I removed the tower for winter storage) but it fits great! Very fast shipping, very durable material, I am very satisfied with this cover.”
- J. Buckles
a
“The size and the straps works well. I tried the straps for the cover support but twice after a heavy rain large amount of water were trapped in the middle of the cover. I built a cover support using pvc pipes and I am waiting for another heavy rain to see if this cover support works. I think that the price is reasonable but one has to buy or build a cover support that works.”
- Manuel
“I have a 14 ft alum. boat & 10 hp Merc. motor. The cover extends over both perfect. Great cover and decently priced. Would recommend to others.”
- D. Johnson
Fishing Boat Cover Reviews
“I couldn’t believe how fast they shipped out this boat cover. I believe I ordered it on a Sunday and received it on Tuesday…. It is a really nice cover for the money.”
- “SleeplessnScandia”
Like these reviews? Take a look at our high quality, affordable boat covers by DuraShield!
Dowco Guardian ATV Cover
DuraShield is proud to announce the expansion of its product line to include Dowco ATV covers. Dowco Power Sports is a highly respected leader in the powersports industry, offering top quality covers and accessories for ATVs, motorcycles, boats, snowmobiles, and jet skis.
a
Dowco’s Guardian® ATV covers are available in XL and XXL with a universal fit for even the largest ATVs. These ATV covers protect your bike from rain and snow, UV rays, tree sap, bird droppings, and other harmful effects.
The 100% nylon cover includes a venting system to inhibit condensation buildup and moisture damage. The seams are double-stitched for extra strength and long life, and the hem is elastic for a snug fit on any bike.
Using an ATV cover reduces the risk of theft and vandalism. Dowco covers even include an internal pocket for concealing a cover alarm (not included).
A two-year limited warranty guards against the risk of defects in materials or workmanship.
For more information, visit our product pages:
